How do I Convert a VRS Rx from Seeding Rate to Pounds?

Objective:

Current Stand Recommendations are only generated and exported with a Seeding Rate measurement and does not include an option to edit the product. These instructions specifically address how to complete the conversion from seeding rate to pounds per acre using Pioneer® Field360™ Studio.

Requirements:

• Pioneer® Field360™ Studio access.
• VRS Rx generated out of Corteva™ Fields.

Process:

1. Create the VRS Rx in Corteva Fields.
2. Export and Download the VRS Rx.
3. Open Pioneer® Field360™ Studio.
4. Load the operation and click on the field you need exported.
5. Select the 'Seeding' menu.
6. Select 'Advanced Seed Recommendations'.
7. Select the 'Open' icon.
8. Select ‘Advanced Seed Rate Script Editor’.
9. Select the following in each tab:
   
   • Crop Zones
     
     • Select Crop: Corn [You can select Soybeans or other crops if needed].
     • Select Commodity: <Any>.
   • Layers
     
     • Check-mark the ‘Stand 2.0 VRS Recommendation’ layer.
   • Calculators
     
     • Ensure NOTHING is selected.
   • Surfacing
     
     • UNCHECK everything to ensure nothing is selected.
   • General
     
     • UNCHECK everything to ensure nothing is selected.
10. Select ‘Run’.
11. Select the following:
    
    • Variety Placement method: Add missing varieties.
    • Existing VRS Recommendations: Overwrite any existing VRS Recommendation.
12. Select ‘OK’.
13. Select ‘Close’.
14. Select ‘Seeding’.
15. Select ‘VRS Export’.
16. Select the monitor (ex: Kinze Blue Vantage) and your export configurations as desired.
    
    • Set the ‘Settings’.
    • Set the ‘Include Reports’.
    • Set the filename template.
    • Set the ‘Send To’.
    • Under ‘File’ select where the export should go.
    • Products:
      • Select 'Edit Product'.
      • Select Controller Unit: pound/acre.
      • Conversion: seed/pound (conversion will come from bag tag, seeds/lb).
17. Select ‘Export'.